Turn Scrap Metal into Musical Instruments: Sourcing and Choosing Metal

Making musical instruments from scrap metal

In my Child’s Play Music early childhood education incursion programs I tell children that they can make music from practically anything that makes a sound – and it’s true! And if you are looking for metal to make your own musical instruments you can’t beat a real old-fashioned ‘scrappie’, a scrap yard piled high with with all sort of interesting metal bits carefully sorted by type of metal.

Metal + imagination = musical instruments

I design my instruments to be simple, safe and tough, because I work with very young children in all kinds of early childhood education and care settings here in Perth. Wherever possible I use recycled materials; I get a real kick out of upcycling scrap metal to make great sounding instruments that children love to play, and I love to spread that message of sustainability.

Stainless steel cymbals - CRASH!

Stainless steel cymbals – CRASH!

In this post I’ll be sharing with you:

  • What kind of scrap metal dealer to look for
  • The best scrappie in Perth, WA!
  • The kinds of instruments you can make from scrap metal
  • Types of scrap metal, and what instruments they are best-suited to
  • How to test the scrap metal for its sonic qualities
  • My most recent scrap yard score 🙂

First, find your scrap yard!

Most big scrap yards crush their metal as soon as it arrives into big cubes of mangled metal. So you want the old-style scrap yard that sorts and stores metal before crushing it and will sell it to the public by the kilo.

Often these are smaller, family-owned yards rather than the big chains. You can still find them in most cities, tucked away in obscure places. Some of the big chains also sell scrap to the public but they tend to have a limited range, mainly of structural steel and pipe, and this is less useful for instruments.

To find a scrappie, in Australia search “scrap metal merchant” in the online Yellow Pages. Check out their websites – some will say they sell to the public, but even if they don’t say so they may still do it.

If there are images of piles or bins of un-crushed metal it’s pretty likely they will sell it. If there are only images of cubes of crushed metal, it’s a pretty good indication that they aren’t selling to the public.

Scrap metal heaven

And if they don’t have a website at all you are probably on a winner! Like this one:

Rondas & Co – scrap metal heaven!

This is Rondas and Co, at 134 Fitzgerald St, North Perth, and it’s a treasure trove of junk. Many of my instruments are made from metal bought there, and I’ve spent hours happily fossicking through bins looking for just the right bit for my next scrap yard musical extravaganza. No website: just great scrap metal, cheap.

Here’s just four of the musical instruments I’ve sourced the metal for from Rondas:

A metallophone and gongs made from 3mm aluminium plate

A metallophone and gongs made from 3mm aluminium plate

Toolbox fairy chimes and a tubular aluminium glockenspiel

Toolbox fairy chimes and a tubular aluminium glockenspiel

For detailed information about actually making instruments you can’t go past the books by Bart Hopkin – check my review of three of Bart Hopkin’s books here.

Selecting scrap metal for instruments

So what kinds of metal can you find at Rondas, and what kinds of instruments could you make? Well, it all depends on what’s there that day, but here’s a sample:

Steel, aluminium and copper pipe – or old sink units!

Those pipes can be ideal for glockenspiels, wind chimes or even tubular bells, and each type of metal has its own characteristic sound.

Steel tends to be bright and clear-sounding, but it’s hard to work with and heavy, and if it’s thick-walled industrial pipe in mild steel, forget it – it will be have very little resonance and sound very ordinary indeed. Look for thin-walled stainless steel or other hard alloys of steel instead. But mild steel rods can sound good – try them to see!

Aluminium is less bright but sustains well even with relatively thick walls. It’s much easier to cut and much lighter than steel too – I use more aluminium for my instruments than any other metal.

Copper piping is also easier to work than steel, and tends to sound halfway between steel and aluminium in tone. Check inside the pipe – a lot of copper pipe is from old water systems ripped out of demolished houses, and if it is furred up inside with calcium deposits it won’t sound good at all.

But maybe you’re after something for a rhythmic instrument, not melodic:

Woven steel security mesh – could be good for scraper-style instruments like guiros

Ok, you could scrape up a rhythmic storm on that stainless steel security mesh – think Latin American instruments like guiros. Don’t ignore the 44 gallon drums and other steel containers: they can make wonderful thunder drums, and smaller containers like big paint cans can be used for packing tape drums [my YouTube video]

But perhaps you are after the crash of cymbals or something for a flat metal glockenspiel: voila!

Stainless steel sheet – hard to work with, but it can sound great!

That square of 1mm stainless steel on the left – round the corners off with an angle grinder, drill a hole in the centre, bend an ‘X’ crimp from corner to corner: instant crash cymbal! And the 2mm sheet on the right could work well as narrow strips for a glockenspiel, or possibly as a suspended gong.

Aluminium sheet of all kinds

Aluminium sheet of all kinds!

But stainless steel is hard to work with: how about some aluminium sheet instead? In that pile there’s everything from 3mm chequer plate to 1mm sheet – ideal for everything from gongs to metallophones and cymbals. There’s also sheet with all sorts of interesting perforation patterns that could be used for scraper instruments like guiros or even something like the old jug band washboard.

On another day at Rondas you might find something altogether different: I’ve seen stainless steel pots, pans and lids; metal bowls of all kinds; brake discs and drums; sheet copper and brass; bronze castings; even ex-hospital stainless steel trays, bowls and containers.

I had high hopes of a stainless steel hospital bed pan which I thought might sound like a bell, but disappointingly it just went “clunk” when struck. It sounded like … um … what it used to contain!

More about selecting metal – hit it!

So: no shortage of metal, then; but how do you know if it will sound any good? You have to test each piece by hitting it, of course! I take a few different things for strikers and beaters because different materials need different beaters to sound their best:

  • a wooden drumstick or a length of hardwood dowel of similar thickness
  • a piece of dowel with a soft end – either cloth or rubber
  • a piece of nylon rod (the handle of a cheap white kitchen mixing spoon is perfect)
  • A steel rod or screwdriver (particularly good for scraping sounds)

Try all the beaters on each piece of metal, and try hitting it in different places. On the edge, on flat surfaces, towards the middle – you can’t always tell where the best sound will be. If the metal is textured or perforated then make sure you try scraping it too.

You have to know where to hold ’em!

How you hold the metal can make a HUGE difference to how it will sound when struck. Hold it in the wrong place and something that could sound wonderful will probably just sound dull and boring. Here’s a few tips:

For pipe, rods and tubes, hold them vertically between finger and thumb. Most likely the best place to hold it will be around 1/4 of the total length of the piece, as this is a “node”, a point where the pipe is not vibrating. Holding it here means your fingers won’t be damping the vibrations and it will ring out clearly but you may need to experiment with the exact position of hold for the clearest sound.

For flat sheets of metal there are a few ways to try. First off, if it’s sheets of aluminium, copper, bronze or stainless steel, and it’s round, square or rectangular in shape and between 1 and 5mm in thickness – no problems: it WILL sound good!

But different shapes and thicknesses give different sounds and it depends if you are after a cymbal sound, a gong sound or a melodic sound like a glockenspiel or other metallophone. It may take a little work to turn it into an instrument, of course, but that’s what hacksaws, jigsaws and angle grinders were invented for.

For flat metal in strips try the same “pinch between finger and thumb at around 1/4 of the length” technique. If it’s too wide to hold this way, you may need someone to hold it at that point with two hands while you strike it. Or try holding it loosely by one corner – this often works fine. Or try dropping the piece and hitting it while in mid-air. (Caution! Flying metal alert!)

Smallish metal sheets can also be balanced on a finger tip at the centre of the sheet – this will give gong or cymbal sounds depending on the thickness and type of metal.

For odd shaped castings it’s a matter of experimenting with different holds, and the less contact area of the hold the better. Again, try balancing it on a finger tip at around the central position, or dropping it and hitting it in mid-air.

The bells, the bells!

A while ago I was at Rondas, looking for something new to inspire me. And in a bin I found just what I was looking for: circular aluminium castings, ideal for bell-like tones.

Aluminium castings – perfect!

I’m not sure what they were in their former life – I think some of them might be compressor components – but I balanced them on my finger-tip, hit them with a drumstick and they sounded great! Clear and quite high-pitched but with a variety of tones and pitches.

I took them to be weighed – Rondas sell aluminium at $4 per kilogram – and handed over A$17.60 for the 12 castings. Excellent! To my workshop, James, and don’t spare the horses!

But wait, there’s more!

In my next post I’ll walk you through the whole process of turning these scrap castings into a musical instrument, including how to build a very strong and stable PVC pipe frame.

Have fun – and keep playing!

8 thoughts on “Turn Scrap Metal into Musical Instruments: Sourcing and Choosing Metal

  1. Many thanks Alec for such an informative blog post! I totally agree that metal+imagination=music and would also like to add how much I enjoy adding water into this equation every now and then.

    • Thanks, Juliet! Glad you liked it, and yes, metal is perfect for water play. My water play & music play post is my most popular post ever; I don’t know this one will reach the same number of people since it’s a bit more “techie”, but I hope it encourages people to give making instruments a go.

  2. Oh my goodness, Alec! You are amazing! I think it’s just incredible that you take absolute trash and turn it into these gorgeous instruments! That is a gift!! Thanks so much for sharing on my page today!

  3. Pingback: Scrap Metal Musical Instruments | Lesson Plans | CraftGossip.com

  4. Pingback: Building a PVC Frame for Scrap Metal Musical Instruments | Child's Play Music

Leave a Reply to Alec Duncan Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s